Do you really need a CFA?

CFA or Cutting for Approval, do you really need one?

Yes, it does take time but in the long run it saves time and money. If the dye lot comes in different from the swatch or memo then that fabric can’t be used. And never cut into a bolt of fabric until the CFA is approved because if you do, and it’s wrong, then you just bought yourself some fabric. So if you or the designer thinks that CFAs are a waste of time, think again.

Choosing the right fabric for a job is both a fun and a serious search. We all love sifting through sample books and memos to find just the right fabric, color and texture. Getting the color right is just as important as selecting the correct type of fabric.

Our assignment was to find a light gray linen blend. Not to green, not too pink, slightly on the blue side and blends with the wall color – you get the picture. We must have gone through about 50 swatches of gray linen before we found just the right one. And then -eureka! Found it!

For this master bedroom we needed 63 yards for 5 windows. Yardage was checked at the warehouse. They had 2 bolts of 11 yards and 53 yards. Now, those 2 bolts could be the same dye lot or not. So we asked for a CFA from both bolts. And wouldn’t you know it, the dye lots didn’t match. Not even close.

We requested a new bolt and the warehouse got a whole new bolt from the mill. It took an extra week but it was worth it. All of the yardage came in on one bolt and it was the perfect color. Continuous yardage is always preferred for each room over several bolts.

So requesting that CFA only took an extra week and we got all of the yardage on one bolt. Definitely worth getting the CFA and the wait!

A little information about one of our most important tools….Scissors!

Did you ever wonder who or when some of the most common things we use were
invented? Like scissors for instance. Every day we use a variety of different
scissors to do everything from cutting paper to cutting fabric. We don’t give it a
thought – just find the pair we need, use them and set them down somewhere.


A good pair of sharp scissors is imperative to our fabrication businesses. In fact to
protect our best scissors we guard them, hide them from the family, and do
anything to keep them from ending up in the garage.

It is commonly thought that scissors were invented 3000 to 4ooo years ago in the
Middle East. That’s a long time ago!


It is believed that around 1500 BC Egyptians used a two bladed device connected
by a spring like mechanism.

Then around 100 AD the Romans invented a cross
blade design similar to our modern scissors.


In 1761 English manufacturer Robert Hinchliffe adapted the design so that it could
be mass produced.

So this common object that we use every day goes back a long way. There is an
almost endless variety of types of scissors for every use and need as well as left
and right handed scissors.

What are your favorite scissors? What brands do you prefer? Do you have a pair
that you have owned for longer than you can remember? I have a pair of Ginghers
that are decades old. Please share with us in the comments section below.